14-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Note! Two-part solution.
Model specific two-part solution Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
Is your car missing? This headrest mount fits a number of BMW 3GT- F34, some of them are listed below. Are you missing a model? Measure the headrest in your BMW 3GT- F34, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
Brodit BMW 3GT- F34 Headrest mount with monitor mount Headrest mount
Stock : 1
Item No : 810820
£42.13 incl. Vat
14-16 For multimedia-monitors with a vertical slot in back.
For installation of multimedia screens in BMW 3GT- F34. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the BMW 3GT- F34. The installation is quick and will not damage the interior of the BMW 3GT- F34.
The head rest screen mount fits a number of BMW 3GT- F34, some of them are listed here. Are you missing a model? Measure the head rest in you BMW 3GT- F34, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your BMW 3GT- F34.
Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.
14-16 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
Is your car missing? This headrest mount fits a number of BMW 3GT- F34, some of them are listed below. Are you missing a model? Measure the headrest in your BMW 3GT- F34, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.
14-16
The ProClip is a mounting bracket for the BMW 3GT- F34's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 3GT- F34. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
Stock : Brodit Brand New Item - PreOrder Yours NOW !
Item No : 854979
£15.67 incl. Vat
14-16
The ProClip is a mounting bracket for the BMW X5's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW X5. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
14-16
The ProClip is a mounting bracket for the BMW X5's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW X5. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
Brodit BMW 316-330-E90-E91-E92-E93 Headrest mount Headrest mount
Stock : Brodit Brand New Item - PreOrder Yours NOW !
Item No : 810711
£48.99 incl. Vat
05-12 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
Is your car missing? This headrest mount fits a number of BMW 316-330-E90-E91-E92-E93, some of them are listed below. Are you missing a model? Measure the headrest in your BMW 316-330-E90-E91-E92-E93, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.
14-16
The ProClip is a mounting bracket for the BMW 4-series's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 4-series. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
14-14
The ProClip is a mounting bracket for the BMW 3GT's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 3GT. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
14-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Note! Two-part solution.
Model specific two-part solution Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
Is your car missing? This headrest mount fits a number of BMW 4-series, some of them are listed below. Are you missing a model? Measure the headrest in your BMW 4-series, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
