Brodit ProClip and Holders - Dedicated UK Supplier

04-10 
  The ProClip is a mounting bracket for the BMW 6-series E63- E64's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 6-series E63- E64. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

BMW  6-series E63- E64 Brodit Proclip Fitting Instructions

12-16 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in BMW 6-series F12- F13. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the BMW 6-series F12- F13. The installation is quick and will not damage the interior of the BMW 6-series F12- F13.

The head rest screen mount fits a number of BMW 6-series F12- F13, some of them are listed here. Are you missing a model? Measure the head rest in you BMW 6-series F12- F13, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your BMW 6-series F12- F13.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

BMW  6-series F12- F13 Brodit Proclip Fitting Instructions

12-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of BMW 6-series F12- F13, some of them are listed below. Are you missing a model? Measure the headrest in your BMW 6-series F12- F13, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 

BMW  6-series F12- F13 Brodit Proclip Fitting Instructions

12-12 For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
  For installation of Tablet DVD and multimedia screens in BMW 6-series F12- F13. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the BMW 6-series F12- F13. The installation is quick and will not damage the interior of the BMW 6-series F12- F13.

The head rest screen mount fits a number of BMW 6-series F12- F13, some of them are listed here. Are you missing a model? Measure the head rest in you BMW 6-series F12- F13, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your BMW 6-series F12- F13.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

BMW  6-series F12- F13 Brodit Proclip Fitting Instructions

89-95 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of BMW 518-540-M5 E34, some of them are listed below. Are you missing a model? Measure the headrest in your BMW 518-540-M5 E34, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 

BMW  518-540-M5 E34 Brodit Proclip Fitting Instructions

88-95 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of BMW 518-540-M5 E34, some of them are listed below. Are you missing a model? Measure the headrest in your BMW 518-540-M5 E34, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 

BMW  518-540-M5 E34 Brodit Proclip Fitting Instructions

89-95 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in BMW 518-540-M5 E34. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the BMW 518-540-M5 E34. The installation is quick and will not damage the interior of the BMW 518-540-M5 E34.

The head rest screen mount fits a number of BMW 518-540-M5 E34, some of them are listed here. Are you missing a model? Measure the head rest in you BMW 518-540-M5 E34, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your BMW 518-540-M5 E34.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

BMW  518-540-M5 E34 Brodit Proclip Fitting Instructions

88-95 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in BMW 518-540-M5 E34. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the BMW 518-540-M5 E34. The installation is quick and will not damage the interior of the BMW 518-540-M5 E34.

The head rest screen mount fits a number of BMW 518-540-M5 E34, some of them are listed here. Are you missing a model? Measure the head rest in you BMW 518-540-M5 E34, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your BMW 518-540-M5 E34.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

BMW  518-540-M5 E34 Brodit Proclip Fitting Instructions

12-13 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in BMW 3-series F30. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the BMW 3-series F30. The installation is quick and will not damage the interior of the BMW 3-series F30.

The head rest screen mount fits a number of BMW 3-series F30, some of them are listed here. Are you missing a model? Measure the head rest in you BMW 3-series F30, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your BMW 3-series F30.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

BMW  3-series F30 Brodit Proclip Fitting Instructions

88-95 For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
  For installation of Tablet DVD and multimedia screens in BMW 518-540-M5 E34. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the BMW 518-540-M5 E34. The installation is quick and will not damage the interior of the BMW 518-540-M5 E34.

The head rest screen mount fits a number of BMW 518-540-M5 E34, some of them are listed here. Are you missing a model? Measure the head rest in you BMW 518-540-M5 E34, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your BMW 518-540-M5 E34.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

BMW  518-540-M5 E34 Brodit Proclip Fitting Instructions