Brodit ProClip and Holders - Dedicated UK Supplier

 MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
  This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car's dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
MultiStand film!
 
 

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

 MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
  This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car's dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
MultiStand film!
 
 

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

 Mounting Adapter and Screws Included. Black.
  By using the MultiStand it is easier to carry the iPad around with you. You easily place the iPad in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
MultiStand film!
 

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

 Tilt swivel mount.
  Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.

With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

09-16 
  Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.

 

13-16 
 

 

15-16 
 

 

14-16 
  Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.

 

95-02 
  Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.

 

03-09 For taxameter
  Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.