Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
i e href   apple   nokia   i h   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   i href   a h   a 647   audi a3   a href   942044   ford mondeo   xc60   iphone 4   a hx   Samsung Galaxy Nexus   iPad   icom  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Browse Accessories by

Brand

Category

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

15579 items found that match your criteria.

Brodit Apple iPad Pro Passive holder with tilt swivel 

Stock : 2

Item No : 511820

£37.23 incl. Vat
Brodit 511820 Passive holder with tilt swivel For Apple iPad Pro Car Kit Holder Mount
Enlarge image

 
  With your iPad Pro in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Pro phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 


Brodit Sony Xperia M4 Aqua Passive holder with tilt swivel 

Stock : 2

Item No : 511819

£25.47 incl. Vat
Brodit 511819 Passive holder with tilt swivel For Sony Xperia M4 Aqua Car Kit Holder Mount
Enlarge image

 
  When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

 


Brodit Apple iPhone 6S Plus Passive holder with tilt swivel 

Stock : 1 - 3 [ call to confirm ]

Item No : 511741

£25.47 incl. Vat
Brodit 511741 Passive holder with tilt swivel For Apple iPhone 6S Plus Car Kit Holder Mount
Enlarge image

 For Otterbox Defender Series Case.
  When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

 


Brodit Brodit Accessories Pipe Mount with mounting plate 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 215794

£27.43 incl. Vat
Brodit 215794 Pipe Mount with mounting plate For Brodit Accessories Car Kit Holder Mount
Enlarge image

 Fits diameter 22-31 mm and 19x25-22x35 mm. Mounting plate 50x42 mm. Pre-drilled holes 4mm diameter.
  For installation of devices on pipes and rods/bars, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The size of the mounting plate is 50x42 mm with 4 pre-drilled holes for nut and bold. The diameter of the holes is 4 mm. The mount fits round bars between 22 mm and 31 mm, and oblong bars between 19x25 mm and 22x35 mm. Made in black plastic.

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Brodit Brodit Accessories Pipe Mount with mounting plate 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 215793

£27.43 incl. Vat
Brodit 215793 Pipe Mount with mounting plate For Brodit Accessories Car Kit Holder Mount
Enlarge image

 Fits diameter 22-31 mm and 19x25-22x35 mm. Mounting plate 50x42 mm. Pre-drilled AMPS-holes.
  For installation of devices on pipes and rods/bars, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The size of the mounting plate is 50x42 mm with pre-drilled AMPS-holes. The mount fits round bars between 22 mm and 31 mm, and oblong bars between 19x25 mm and 22x35 mm. Made in black plastic.

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Brodit Brodit Accessories Pipe Mount with mounting plate 

Stock : 1 - 3 [ call to confirm ]

Item No : 215792

£32.33 incl. Vat
Brodit 215792 Pipe Mount with mounting plate For Brodit Accessories Car Kit Holder Mount
Enlarge image

 Fits diameter 22-31 mm and 19x25-22x35 mm. Mounting plate 50x42 mm. Pre-drilled AMPS-holes.
  For installation of devices on pipes and rods/bars, for example most types of vehicles; motorcycles, boats, carts, stands, wheelchairs, airplanes etc. The mounting plate is placed on a tilt swivel that tilts 210 and rotates 360, size of the mounting plate is 50x42 mm with pre-drilled AMPS-holes. The mount fits round bars between 22 mm and 31 mm, and oblong bars between 19x25 mm and 22x35 mm. Made in black plastic.

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Brodit Samsung Galaxy Tab 3 Lite MultiStand 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 215781

£18.89 incl. Vat
Brodit 215781 MultiStand For Samsung Galaxy Tab 3 Lite Car Kit Holder Mount
Enlarge image

 MultiStand support leg, for smaller surfpads. Length: 98 mm. Mounting Adapter and Screws Included. Black.
  This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!

When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.

You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

The support leg is 98 mm long and fits best with smaller surfpads.

Tablets should not be installed onto a car's dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

MultiStand film!



  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Brodit Panasonic Toughpad FZ-G1 MultiStand 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 215780

£37.23 incl. Vat
Brodit 215780 MultiStand For Panasonic Toughpad FZ-G1 Car Kit Holder Mount
Enlarge image

 MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
  This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!

When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.

You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

The support leg is 120 mm long and fits best with larger surfpads.

Tablets should not be installed onto a car's dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

MultiStand film!



  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Brodit Panasonic Toughpad FZ-A1 MultiStand 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 215780

£37.23 incl. Vat
Brodit 215780 MultiStand For Panasonic Toughpad FZ-A1 Car Kit Holder Mount
Enlarge image

 MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
  This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!

When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.

You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

The support leg is 120 mm long and fits best with larger surfpads.

Tablets should not be installed onto a car's dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

MultiStand film!



  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Brodit Apple iPad Pro MultiStand 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 215780

£37.23 incl. Vat
Brodit 215780 MultiStand For Apple iPad Pro Car Kit Holder Mount
Enlarge image

 MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
  This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!

When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.

You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

The support leg is 120 mm long and fits best with larger surfpads.

Tablets should not be installed onto a car's dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

MultiStand film!



  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories