Brodit ProClip and Holders - Dedicated UK Supplier

12-15 
  The ProClip is a mounting bracket for the Toyota Prius Plug-in's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Prius Plug-in. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

08-16 
  ProClip ar en monteringsbygel som monteras på bilens instrumentbrada. På ProClip kan du montera t ex en hållare till mobiltelefonen eller handdatorn. Trafiksakert och bekvamt -du har alltid din mobiltelefon, handdator etc. inom bekvamt rackhåll. ProClip ar speciellt utformad till varje bilmodell och går snabbt och latt att montera. Monteringen skadar inte bilens inredning och du behöver inga specialverktyg. Tillverkad i svart ABS-plast. Monteringsanvisning medföljer.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

08-16 NOTICE: Visually inspect your dash to match our photos. This ProcClip is only for the style of CD player shown.
  The ProClip is a mounting bracket for the Audi A4 Allroad's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A4 Allroad. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

12-15 
  The ProClip is a mounting bracket for the Toyota Prius Plug-in's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Prius Plug-in. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

 With tilt swivel. Apple approved charging cable.
  Use an active holder for your iPad while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Pro phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

 With tilt swivel. Apple approved charging cable. For Otterbox Defender Series Case.
  Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

When you place the iPhone in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

 With USB-cable with cig-plug adapter. With tilt swivel.
 
  Use an active holder for your tablet while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a USB-cable with cig-plug adapter. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.
 
Important note! In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

 With tilt swivel. With USB cable. Apple approved charging cable.
  The choice for a freshly charged battery, a neat and comfortable installation. The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
  
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

 With tilt swivel. With USB cable.
  The active holder charges your Xperia M4 Aqua when it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. 12 Volt. Attach the holder onto a ProClip Mounting Platform in your car.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

 With tilt swivel. With USB cable. Apple approved charging cable. For Otterbox Defender Series Case.
  Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is made of ABS plastic. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.
 
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.