Brodit ProClip and Holders - Dedicated UK Supplier

97-02 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Citroen Berlingo, some of them are listed below. Are you missing a model? Measure the headrest in your Citroen Berlingo, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

04-09 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chrysler Pacifica, some of them are listed below. Are you missing a model? Measure the headrest in your Chrysler Pacifica, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

05-11 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chevrolet Nubira Stationwagon, some of them are listed below. Are you missing a model? Measure the headrest in your Chevrolet Nubira Stationwagon, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

05-11 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chevrolet Nubira Sedan, some of them are listed below. Are you missing a model? Measure the headrest in your Chevrolet Nubira Sedan, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

05-10 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chevrolet Matiz, some of them are listed below. Are you missing a model? Measure the headrest in your Chevrolet Matiz, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

05-11 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chevrolet Lacetti Hatchback-Stationwagon, some of them are listed below. Are you missing a model? Measure the headrest in your Chevrolet Lacetti Hatchback-Stationwagon, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

05-11 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chevrolet Lacetti Hatchback-Stationwagon, some of them are listed below. Are you missing a model? Measure the headrest in your Chevrolet Lacetti Hatchback-Stationwagon, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

05-11 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chevrolet Lacetti 4 door-SX-CDX, some of them are listed below. Are you missing a model? Measure the headrest in your Chevrolet Lacetti 4 door-SX-CDX, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

05-09 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chevrolet Equinox, some of them are listed below. Are you missing a model? Measure the headrest in your Chevrolet Equinox, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

07-10 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.
 
Is your car missing?
This headrest mount fits a number of Chevrolet Epica, some of them are listed below. Are you missing a model? Measure the headrest in your Chevrolet Epica, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.