Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   Samsung Galaxy Nexus   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   tomtom 720   iPhone 7   blackberry   a 647  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

15602 items found that match your criteria.

Brodit Lexus GS Series ProClip Console mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 830510

£15.20 incl. Vat
Brodit 830510 ProClip For Lexus GS Series Car Kit Holder Mount
Enlarge image

98-04 Adjustable console mount.
  A ProClip that is adjustable to suit the height of the console in a number of Lexus GS Series. In most Lexus GS Series it is placed on the right side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.


Brodit Lexus RX Series Monitor mount between seats Between seats mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 825065

£34.91 incl. Vat
Brodit 825065 Monitor mount between seats For Lexus RX Series Car Kit Holder Mount
Enlarge image

04-09 Mount for monitors with a hole underneath for thumb screw attachment ("-thread).
  For installation of Tablet DVD and multimedia screens in Lexus RX Series. The screen mount fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed between the front seats, giving the back seat passengers a perfect view. The screen mount comes with a tilt swivel so it can be adjusted in order to avoid light reflection. You can take the screen with you when leaving the Lexus RX Series. Installation is quick and easy. The interior of the Lexus RX Series will not be damaged, as no drilling holes is required.

  Installing your tablet DVD or multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the tilt swivel allows the monitor to be adjusted in any position for your viewing pleasure. Give your rear seated passengers something better to look at than the back of your headrest! These headrest mounted car kits fit most headrests that have a minimum inner size of 95mm and a maximum outer size of 239mm - please measure your headrest prior to ordering.


Brodit Lexus IS Series Monitor mount between seats Between seats mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 825025

£36.11 incl. Vat
Brodit 825025 Monitor mount between seats For Lexus IS Series Car Kit Holder Mount
Enlarge image

01-05 Mount for monitors with a hole underneath for thumb screw attachment ("-thread).
  For installation of Tablet DVD and multimedia screens in Lexus IS Series. The screen mount fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed between the front seats, giving the back seat passengers a perfect view. The screen mount comes with a tilt swivel so it can be adjusted in order to avoid light reflection. You can take the screen with you when leaving the Lexus IS Series. Installation is quick and easy. The interior of the Lexus IS Series will not be damaged, as no drilling holes is required.



  Installing your tablet DVD or multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the tilt swivel allows the monitor to be adjusted in any position for your viewing pleasure. Give your rear seated passengers something better to look at than the back of your headrest! These headrest mounted car kits fit most headrests that have a minimum inner size of 95mm and a maximum outer size of 239mm - please measure your headrest prior to ordering.


Brodit Lexus RX Series Monitor mount between seats Between seats mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 823065

£34.91 incl. Vat
Brodit 823065 Monitor mount between seats For Lexus RX Series Car Kit Holder Mount
Enlarge image

04-09 Mount for monitors with a vertical slot in back.
  For installation of multimedia screens in Lexus RX Series. The screen mount is placed between the front seats, giving the back seat passengers a perfect view. The screen mount comes with a tilt swivel so it can be adjusted in order to avoid light reflection. You can take the screen with you when leaving the Lexus RX Series. Installation is quick and easy. The interior of the Lexus RX Series will not be damaged, as no drilling holes is required.

The screen mount fits screens with a vertical slot on the back side.

  Installing your multimedia monitor screen (with rear vertical slot) has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the tilt swivel allows the monitor to be adjusted in any position for your viewing pleasure. These headrest mounted car kits fit most headrests that have a minimum inner size of 95mm and a maximum outer size of 239mm - please measure your headrest prior to ordering.


Brodit Lexus IS Series Monitor mount between seats Between seats mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 823025

£34.91 incl. Vat
Brodit 823025 Monitor mount between seats For Lexus IS Series Car Kit Holder Mount
Enlarge image

01-05 Mount for monitors with a vertical slot in back.
  For installation of multimedia screens in Lexus IS Series. The screen mount is placed between the front seats, giving the back seat passengers a perfect view. The screen mount comes with a tilt swivel so it can be adjusted in order to avoid light reflection. You can take the screen with you when leaving the Lexus IS Series. Installation is quick and easy. The interior of the Lexus IS Series will not be damaged, as no drilling holes is required.

The screen mount fits screens with a vertical slot on the back side.

  Installing your multimedia monitor screen (with rear vertical slot) has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the tilt swivel allows the monitor to be adjusted in any position for your viewing pleasure. These headrest mounted car kits fit most headrests that have a minimum inner size of 95mm and a maximum outer size of 239mm - please measure your headrest prior to ordering.


Brodit Lexus RX Series Headrest mount Headrest mount

Stock : 3

Item No : 811020

£47.52 incl. Vat
Brodit 811020 Headrest mount For Lexus RX Series Car Kit Holder Mount
Enlarge image

99-13 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Lexus RX Series, some of them are listed below. Are you missing a model? Measure the headrest in your Lexus RX Series, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 


Brodit Lexus LX Series Headrest mount Headrest mount

Stock : 3

Item No : 811020

£47.52 incl. Vat
Brodit 811020 Headrest mount For Lexus LX Series Car Kit Holder Mount
Enlarge image

03-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Lexus LX Series, some of them are listed below. Are you missing a model? Measure the headrest in your Lexus LX Series, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 


Brodit Lexus LS Series Headrest mount Headrest mount

Stock : 3

Item No : 811020

£47.52 incl. Vat
Brodit 811020 Headrest mount For Lexus LS Series Car Kit Holder Mount
Enlarge image

07-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Lexus LS Series, some of them are listed below. Are you missing a model? Measure the headrest in your Lexus LS Series, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 


Brodit Lexus IS Series Headrest mount Headrest mount

Stock : 3

Item No : 811020

£47.52 incl. Vat
Brodit 811020 Headrest mount For Lexus IS Series Car Kit Holder Mount
Enlarge image

06-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Lexus IS Series, some of them are listed below. Are you missing a model? Measure the headrest in your Lexus IS Series, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 


Brodit Lexus HS Series Headrest mount Headrest mount

Stock : 3

Item No : 811020

£47.52 incl. Vat
Brodit 811020 Headrest mount For Lexus HS Series Car Kit Holder Mount
Enlarge image

10-13 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Lexus HS Series, some of them are listed below. Are you missing a model? Measure the headrest in your Lexus HS Series, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 


All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories