Brodit ProClip and Holders - Dedicated UK Supplier

08-16 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Rogue, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Rogue, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

04-16 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Quest, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Quest, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

09-13 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Qashqai +2, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Qashqai +2, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

09-13 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Qashqai +2, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Qashqai +2, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

07-13 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Qashqai, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Qashqai, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

14-16 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Qashqai, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Qashqai, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

03-07 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Pulsar, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Pulsar, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

02-09 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Primera, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Primera, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

02-09 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Primera, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Primera, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

05-13 Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Nissan Pathfinder, some of them are listed below. Are you missing a model? Measure the headrest in your Nissan Pathfinder, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.