Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   audi a3   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   blackberry   tomtom 720   a 647   iPhone 7  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

15654 items found that match your criteria.

Brodit Citroen C4 Picasso- New ProClip 

Stock : 1

Item No : 604931

£15.20 incl. Vat
Brodit 604931 ProClip For Citroen C4 Picasso- New Car Kit Holder Mount
Enlarge image

13-14 
  The ProClip is a mounting bracket for the Citroen C4 Picasso- New's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C4 Picasso- New. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.


Brodit Getac Z710 (US Version) Holder with lock. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 536481

£166.34 incl. Vat
Brodit 536481 Holder with lock. For Getac Z710 (US Version) Car Kit Holder Mount
Enlarge image

 Active holder for fixed installation. With tilt swivel. Slim design with charger integrated in the holder. 2 keys included. Fits unit both with and without handstrap.
  This holder is to be used when you want to secure your Getac Z710 and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac Z710 without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac Z710 from the holder you need the key, two keys are included. Fits units both with and without handstrap.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.

 


Brodit Getac Z710 (US Version) Holder with lock. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 535481

£166.34 incl. Vat
Brodit 535481 Holder with lock. For Getac Z710 (US Version) Car Kit Holder Mount
Enlarge image

 Active holder with cig-plug. With tilt swivel. 2 keys included. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
  This holder is to be used when you want to secure your Getac Z710 and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac Z710 without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac Z710 from the holder you need the key, two keys are included. Fits units both with and without handstrap.

Tablets should not be installed onto a car's dashboard if blocking the view or key controls. ProClip is designed for use with smaller devices like smartphones. If you want to place a tablet onto a dashboard, each combination of tablet-car must be examined in detail by yourself in order to determine if such an installation is possible in the specific case. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends using tablets on the car's headrest, installed onto a Brodit headrest mount.

 


Brodit Getac Z710 (US Version) Holder with lock. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 535480

£133.07 incl. Vat
Brodit 535480 Holder with lock. For Getac Z710 (US Version) Car Kit Holder Mount
Enlarge image

 Passive holder with tilt swivel. 2 keys included. Fits unit both with and without handstrap.
  This holder is to be used when you want to secure your Getac and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac from the holder you need the key, two keys are included. Fits units both with and without handstrap.

 


Brodit Getac Z710 (EU Version) Holder with lock. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 535480

£133.07 incl. Vat
Brodit 535480 Holder with lock. For Getac Z710 (EU Version) Car Kit Holder Mount
Enlarge image

 Passive holder with tilt swivel. 2 keys included. Fits unit both with and without handstrap.
  This holder is to be used when you want to secure your Getac and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Getac without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Getac from the holder you need the key, two keys are included. Fits units both with and without handstrap.

 


Brodit Getac Z710 (US Version) Active holder for fixed installation. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 532481

£133.07 incl. Vat
Brodit 532481 Active holder for fixed installation. For Getac Z710 (US Version) Car Kit Holder Mount
Enlarge image

 With tilt swivel. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
  Use an active holder for your Getac Z710 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the unit into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Getac Z710 (US Version) phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 


Brodit Getac Z710 (US Version) Active holder with cig-plug. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 530481

£133.07 incl. Vat
Brodit 530481 Active holder with cig-plug. For Getac Z710 (US Version) Car Kit Holder Mount
Enlarge image

 With tilt swivel. Slim design with charger integrated in the holder. Fits unit both with and without handstrap.
  Use an active holder for your Getac Z710 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the unit into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Getac Z710 (US Version) phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 


Brodit Getac Z710 (US Version) Passive holder with tilt swivel 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 530480

£85.55 incl. Vat
Brodit 530480 Passive holder with tilt swivel For Getac Z710 (US Version) Car Kit Holder Mount
Enlarge image

 Fits unit both with and without handstrap.
  With your Getac in a holder attached in your vehicle you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the vehicle.

 


Brodit Getac Z710 (EU Version) Passive holder with tilt swivel 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 530480

£85.55 incl. Vat
Brodit 530480 Passive holder with tilt swivel For Getac Z710 (EU Version) Car Kit Holder Mount
Enlarge image

 Fits unit both with and without handstrap.
  With your Getac in a holder attached in your vehicle you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the vehicle.

 


Brodit Sony Xperia Tablet Z Active holder for fixed installation. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 513538

£76.04 incl. Vat
Brodit 513538 Active holder for fixed installation. For Sony Xperia Tablet Z Car Kit Holder Mount
Enlarge image

 With tilt swivel, with Molex adapter system.
  Use an active holder for your Tablet Z while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

 


All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories