Brodit ProClip and Holders - Dedicated UK Supplier

 With tilt swivel. With USB cable. Apple approved charging cable. Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm.
  Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.
 
Fits devices with "standard" sized skins (not rugged or slim size). Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
 
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

 With tilt swivel. With USB cable. Apple approved charging cable. Padded.
  Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.
 
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

 With tilt swivel. With USB cable. Apple approved charging cable. Fits devices with skin.
  Use an active holder for your Apple device on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception.
 
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the device in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is made of black plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.
 
This holder fits devices with "standard" sized skins, not rugged or extra thick skins or skins with details sticking out.
 
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

 With tilt swivel, with Molex adapter system. 2A charger.
  An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

 

 With tilt swivel.
  The active holder charges your Xperia J when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

 

 
  When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

 

 Micro USB. 12/24V. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

11-16 
  The ProClip is a mounting bracket for the Audi A6's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A6. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

13-16 
  The ProClip is a mounting bracket for the Volkswagen Golf VII's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Golf VII. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

13-16 
  The ProClip is a mounting bracket for the Skoda Octavia III's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Octavia III. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.