Brodit ProClip and Holders - Dedicated UK Supplier

 Passive holder with tilt swivel. With spring stud locking.
  This holder is to be used when you want to have your iPad extra securely in place and still have it easy accessable.

The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad New 4th Gen phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

 Passive holder with tilt swivel. 2 keys included.
  This holder is to be used when you want to secure your iPad and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.
 
The holder is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the iPad from the holder you need the key, two keys are included.  The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Mini phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
Crash Test film!
 

 

 Passive holder with tilt swivel. 2 keys included.
  This holder is to be used when you want to secure your iPad and still have it easy accessable.

The holder is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the iPad from the holder you need the key, two keys are included. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad New 4th Gen phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

 Slim design with charger integrated in the holder. For use with Li-Ion or Li-Poly batteries.
  Are you using a two-way radio every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. Not only that; the holder also supplies a fully charged battery at all times.

The active holder has a unique slim design with the charging box integrated in the holder and LED indicator to show that charging is in progress, the indicator changes from red to green when fully charged. Attach onto a ProClip Mounting Platform.

 

 Slim design with charger integrated in the holder. For use with Li-Ion or Li-Poly batteries.
  Are you using a two-way radio every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. Not only that; the holder also supplies a fully charged battery at all times.

The active holder has a unique slim design with the charging box integrated in the holder and LED indicator to show that charging is in progress, the indicator changes from red to green when fully charged. Attach onto a ProClip Mounting Platform.

 

 For cable attachment, for use with Apple original Lightning to 30-pin Adapter Cable. With tilt swivel. With spring stud locking.
  This holder is to be used when you want to have your iPad extra securely in place and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.
 
The holder can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.
 
Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to 30-pin Adapter Cable (Apple article. no. MD824ZM/A).
 
The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is equipped with a tilt swivel so you can adjust the angle and easily switch between portrait and landscape mode.
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
Crash Test film!
 

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!

 For cable attachment, for use with Apple original Lightning to USB Cable. With tilt swivel. With spring stud locking.
  The choice when you want to have your iPad extra securely in place and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount.
 
The holder can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.
 
Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB Adapter Cable (Apple article. no. MD818ZM/A).
 
The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is equipped with a tilt swivel so you can adjust the angle and easily switch between portrait and landscape mode.
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
Crash Test film!
 

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!

 For use with Apple original Lightning to USB Cable. With tilt swivel. Griffin USB/cig-plug adapter included.
  This holder for cable attachment can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to 30-pin Adapter Cable (Apple article. no. MD824ZM/A.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad New with Retina (Lightning Connector) phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!

 For use with Apple original Lightning to USB Cable. With tilt swivel. Griffin USB/cig-plug adapter included.
  This holder for cable attachment can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to 30-pin Adapter Cable (Apple article. no. MD824ZM/A.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad New 4th Gen phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!

 For use with Apple original Lightning to 30-pin Adapter Cable.
  This holder for cable attachment can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to 30-pin Adapter Cable (Apple article. no. MD824ZM/A.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad New with Retina (Lightning Connector) phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!