Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
i e href   apple   nokia   i h   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   942044   i href   a 647   ford mondeo   a h   xc60   iphone 4   Samsung Galaxy Nexus   iPad   a hx   a href   icom  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Browse Accessories by

Brand

Category

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

15579 items found that match your criteria.

Brodit Huawei MediaPad Active holder for fixed installation. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 513385

£82.99 incl. Vat
Brodit 513385 Active holder for fixed installation. For Huawei MediaPad Car Kit Holder Mount
Enlarge image

 With tilt swivel, with Molex adapter system.
  Use an active holder for your Huawei while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

 


Brodit Toyota Prius c Headrest mount with monitor mount Headrest mount

Stock : 1

Item No : 810820

£42.13 incl. Vat
Brodit 810820 Headrest mount with monitor mount For Toyota Prius c Car Kit Holder Mount
Enlarge image

12-16 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Toyota Prius c. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Toyota Prius c. The installation is quick and will not damage the interior of the Toyota Prius c.

The head rest screen mount fits a number of Toyota Prius c, some of them are listed here. Are you missing a model? Measure the head rest in you Toyota Prius c, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Toyota Prius c.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.


Brodit Fiat Freemont Headrest mount with monitor mount Headrest mount

Stock : 1

Item No : 810820

£42.13 incl. Vat
Brodit 810820 Headrest mount with monitor mount For Fiat Freemont Car Kit Holder Mount
Enlarge image

11-16 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Fiat Freemont. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Fiat Freemont. The installation is quick and will not damage the interior of the Fiat Freemont.

The head rest screen mount fits a number of Fiat Freemont, some of them are listed here. Are you missing a model? Measure the head rest in you Fiat Freemont, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Fiat Freemont.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.


Brodit BMW 6-series E63- E64 ProClip Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 853541

£15.99 incl. Vat
Brodit 853541 ProClip For BMW 6-series E63- E64 Car Kit Holder Mount
Enlarge image

04-10 
  The ProClip is a mounting bracket for the BMW 6-series E63- E64's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 6-series E63- E64. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.


Brodit Land Rover Discovery 1+2 ProClip Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 852096

£15.67 incl. Vat
Brodit 852096 ProClip For Land Rover Discovery 1+2 Car Kit Holder Mount
Enlarge image

94-04 NOT for wood grain panel.
  The ProClip is a mounting bracket for the Land Rover Discovery 1+2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Discovery 1+2. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.


Brodit Land Rover Discovery 1+2 ProClip Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 852046

£15.99 incl. Vat
Brodit 852046 ProClip For Land Rover Discovery 1+2 Car Kit Holder Mount
Enlarge image

90-93 
  The ProClip is a mounting bracket for the Land Rover Discovery 1+2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Discovery 1+2. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.


Brodit BMW 6-series F12- F13 Headrest mount with monitor mount Headrest mount

Stock : 1

Item No : 810820

£42.13 incl. Vat
Brodit 810820 Headrest mount with monitor mount For BMW 6-series F12- F13 Car Kit Holder Mount
Enlarge image

12-16 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in BMW 6-series F12- F13. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the BMW 6-series F12- F13. The installation is quick and will not damage the interior of the BMW 6-series F12- F13.

The head rest screen mount fits a number of BMW 6-series F12- F13, some of them are listed here. Are you missing a model? Measure the head rest in you BMW 6-series F12- F13, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your BMW 6-series F12- F13.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.


Brodit Mitsubishi Fuso Canter ProClip Angled mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 853035

£15.67 incl. Vat
Brodit 853035 ProClip For Mitsubishi Fuso Canter Car Kit Holder Mount
Enlarge image

01-06 
  The ProClip is a mounting bracket for the Mitsubishi Fuso Canter's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mitsubishi Fuso Canter. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.


Brodit Toyota Prius c Headrest mount Headrest mount

Stock : 3

Item No : 811020

£48.99 incl. Vat
Brodit 811020 Headrest mount For Toyota Prius c Car Kit Holder Mount
Enlarge image

12-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

Is your car missing?
This headrest mount fits a number of Toyota Prius c, some of them are listed below. Are you missing a model? Measure the headrest in your Toyota Prius c, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 


Brodit BMW 6-series F12- F13 Headrest mount Headrest mount

Stock : 3

Item No : 811020

£48.99 incl. Vat
Brodit 811020 Headrest mount For BMW 6-series F12- F13 Car Kit Holder Mount
Enlarge image

12-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

Is your car missing?
This headrest mount fits a number of BMW 6-series F12- F13, some of them are listed below. Are you missing a model? Measure the headrest in your BMW 6-series F12- F13, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 


All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories