Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   audi a3   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Samsung Galaxy S8   Brodit iPhone   blackberry   tomtom 720   iPhone 7   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

15654 items found that match your criteria.

Brodit Sony Ericsson Cedar Active holder for fixed installation. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 513218

£56.25 incl. Vat
Brodit 513218 Active holder for fixed installation. For Sony Ericsson Cedar Car Kit Holder Mount
Enlarge image

 With tilt swivel, with Molex adapter system. 2A charger.
  An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

 


Brodit HTC Gratia Active holder with cig-plug. 

Stock : 3

Item No : 512142

£43.72 incl. Vat
Brodit 512142 Active holder with cig-plug. For HTC Gratia Car Kit Holder Mount
Enlarge image

 With tilt swivel.
  The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

 


Brodit Samsung Continuum Passive holder with tilt swivel 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 511215

£24.24 incl. Vat
Brodit 511215 Passive holder with tilt swivel For Samsung Continuum Car Kit Holder Mount
Enlarge image

 
  When keeping your device in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

 


Brodit VeriFone VX 670 Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 245314

£36.11 incl. Vat
Brodit 245314 Passive holder with tilt swivel For VeriFone VX 670 Car Kit Holder Mount
Enlarge image

 
  With your unit in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the unit in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the unit when it is in the holder. Attach onto ProClip Mounting Platform.

 


Brodit Mitsubishi Outlander Sport Headrest mount Headrest mount

Stock : 1

Item No : 810820

£40.87 incl. Vat
Brodit 810820 Headrest mount For Mitsubishi Outlander Sport Car Kit Holder Mount
Enlarge image

11-16 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Mitsubishi Outlander Sport. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Mitsubishi Outlander Sport. The installation is quick and will not damage the interior of the Mitsubishi Outlander Sport.

The head rest screen mount fits a number of Mitsubishi Outlander Sport, some of them are listed here. Are you missing a model? Measure the head rest in you Mitsubishi Outlander Sport, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Mitsubishi Outlander Sport.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.


Brodit Citroen C4 II Headrest mount Headrest mount

Stock : 1

Item No : 810820

£40.87 incl. Vat
Brodit 810820 Headrest mount For Citroen C4 II Car Kit Holder Mount
Enlarge image

11-16 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Citroen C4 II. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Citroen C4 II. The installation is quick and will not damage the interior of the Citroen C4 II.

The head rest screen mount fits a number of Citroen C4 II, some of them are listed here. Are you missing a model? Measure the head rest in you Citroen C4 II, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Citroen C4 II.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.


Brodit Citroen C4 II Headrest mount Headrest mount

Stock : 1

Item No : 810820

£40.87 incl. Vat
Brodit 810820 Headrest mount For Citroen C4 II Car Kit Holder Mount
Enlarge image

11-16 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Citroen C4 II. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Citroen C4 II. The installation is quick and will not damage the interior of the Citroen C4 II.

The head rest screen mount fits a number of Citroen C4 II, some of them are listed here. Are you missing a model? Measure the head rest in you Citroen C4 II, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Citroen C4 II.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.


Brodit Citroen C4 II ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 654590

£15.20 incl. Vat
Brodit 654590 ProClip For Citroen C4 II Car Kit Holder Mount
Enlarge image

11-16 
  The ProClip is a mounting bracket for the Citroen C4 II's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C4 II. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.


Brodit Skoda Yeti ProClip Angled mount

Stock : 2

Item No : 654587

£15.20 incl. Vat
Brodit 654587 ProClip For Skoda Yeti Car Kit Holder Mount
Enlarge image

10-16 ONLY for models with Amundsen stereo.
  The ProClip is a mounting bracket for the Skoda Yeti's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.


Brodit Apple iPod Touch 4th Generation Active holder for fixed installation. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 513191

£61.77 incl. Vat
Brodit 513191 Active holder for fixed installation. For Apple iPod Touch 4th Generation Car Kit Holder Mount
Enlarge image

 With tilt swivel. Padded.
  The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.

Install over a 2 A fuse inside the dashboard. Professional installation recommended. Apple approved cable. 12 Volt. Attach onto ProClip Mounting Platform.

 


All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories