Brodit ProClip and Holders - Dedicated UK Supplier

 For fixed installation, with Molex adapter system. 2A charger.
  The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

With the Molex adapter system you can get power for a Bluetooth GPS receiver etc. (The device does not support datatransfer.)

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  MC35 Brodit Holder Fitting Instructions

 Wit tilt swivel. With Molex adapter system, 2A charger.
  An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  L7c SLVR Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger.
  The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  RAZR V3t Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger.
  The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  RAZR V3r Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger.
  The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  RAZR V3m Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger.
  The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  RAZR V3i Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger.
  The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  RAZR V3e Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger.
  The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  RAZR V3c Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger.
  The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
 
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.
 
12/24 Volt. The product is E-approved.  Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

  This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Motorola  RAZR V3 Brodit Holder Fitting Instructions

 With tilt swivel. 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.
  Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With cig-plug cable, 2A charging via the Micro-USB connector. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the phone in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle.
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.
 
Dimensions: 79 x 102 x 48 mm (W x H x D mm)
Weight: 127 g
Cable length (+plug 7.6 cm): 45 cm, stretched:70 cm (or a bit more if needed).  
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +60°C
Approvals: E, CE, FCC, ROHS
 
 

 

Motorola  Moto G5 Plus Brodit Holder Fitting Instructions