Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit trackingLearn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   Samsung Galaxy S8   ford mondeo   xc60   iphone 4   Samsung galaxy s8   iPad   blackberry   Brodit iPhone   icom   hp 6915   tomtom 720  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

Daily Top Ten Views - All Products

Brodit Apple iPhone 7 Holder for Cable Attachment

Stock : 1

Item No : 514660

£ 38.01 incl. Vat



1.

Click Image to Enlarge


For use with Apple original Lightning to USB Cable. With tilt swivel. Padded


This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder. You can charge you iPhone by connecting it to the car's USB socket, or use it with a USB/cig-plug adapter for the car's 12V socket.

Important: Cable not included.The cable attachment holder can be combined with Apple original Lightning to USB Cable. There are two sizes of cables depending on when you purchased your iPhone (Apple article. no. MD818ZM/A and MD818AM/A), the cable attachment block fits them both.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin.

The holder is equipped with a tilt swivel. It means you can easily adjust the angle or your device in order to avoid light reflection on the screen. It also allows you to switch between portrait and landscape mode in a second. Attach onto ProClip mounting platform and you will always have your iPhone within easy sight and reach while on the road.


Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!



Apple iPhone 7 Holder for Cable Attachment

Brodit Apple iPhone 7 Plus Holder for Cable Attachment

Stock : 5

Item No : 514804

£ 38.01 incl. Vat



2.

Click Image to Enlarge


For use with Apple original Lightning to USB Cable. With tilt swivel. Padded


This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder.
Note! Cable not included.The cable attachment holder can be combined with Apple original Lightning to USB Cable (Apple article. no. MD818AM/A. You can charge you iPhone by connecting it to the car's USB socket, or use it with a USB/cig-plug adapter for the car's 12V socket.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin.

The holder is equipped with a tilt swivel. It means you can easily adjust the angle or your device in order to avoid light reflection on the screen. It also allows you to switch between portrait and landscape mode in a second. Attach onto ProClip mounting platform and you will always have your iPhone within easy sight and reach while on the road.


Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!



Apple iPhone 7 Plus Holder for Cable Attachment

Brodit Toyota LandCruiser ProClip Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 834143

£ 15.51 incl. Vat



3.

Click Image to Enlarge


ONLY for automatic shift.


The ProClip is a mounting bracket for the Toyota LandCruiser's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.



Toyota LandCruiser ProClip

Brodit Brodit Accessories Mounting Accessories

Stock : 2

Item No : 215183

£ 8.55 incl. Vat



4.

Click Image to Enlarge


Extension plate,100x50x5mm. With predrilled AMPS holes.


The extension plate makes it possible to attach to units onto the same ProClip, e.g. a Brodit Accessories holder as well as a Brodit Accessories phone holder. Comes with screws, Size: 100x50x5mm.


Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.



Brodit Accessories Mounting Accessories

Brodit Apple iPhone 7 Active holder with cig-plug.

Stock : 5

Item No : 521666

£ 66.54 incl. Vat



5.

Click Image to Enlarge


With tilt swivel. With USB cable. Apple approved charging cable. Adjustable holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm.


Use an active holder for your iPhone 7 on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone 7 within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone 7 is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone 7 in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.

Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.


Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.



Apple iPhone 7 Active holder with cig-plug.

Brodit Apple iPhone X Active holder with cig-plug

Stock : 5

Item No : 521998

£ 85 incl. Vat



6.

Click Image to Enlarge


Holder with adjustable top. With USB cable and cig-plug adapter. Apple approved charging cable. For devices with skin/case. With tilt swivel.



Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.



Apple iPhone X Active holder with cig-plug

Brodit Skoda Superb ProClip Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 604605

£ 15.2 incl. Vat



7.

Click Image to Enlarge



The ProClip is a mounting bracket for the Skoda Superb's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Superb. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.



Skoda Superb ProClip

Brodit Toyota AYGO ProClip Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 605036

£ 15.2 incl. Vat



8.

Click Image to Enlarge



The ProClip is a mounting bracket for the Toyota AYGO's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota AYGO. Made in black ABS plastic. Comes with detailed instructions.




Toyota AYGO ProClip

Brodit Land Rover Discovery 4 ProClip Center mount

Stock : 6

Item No : 654412

£ 15.2 incl. Vat



9.

Click Image to Enlarge



The ProClip is a mounting bracket for the Land Rover Discovery 4's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Discovery 4. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.



Land Rover Discovery 4 ProClip

Brodit Land Rover Freelander ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 853373

£ 15.2 incl. Vat



10.

Click Image to Enlarge



The ProClip is a mounting bracket for the Land Rover Freelander's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Freelander. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.



Land Rover Freelander ProClip


All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories