Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit trackingLearn about our SMS Shipment Alert service

Brodit Search + Buy

 
i e href   i h   apple   nokia   htc   bmw   audi   motorola   a 647   ford   a h   i href   a href   ipod   a hx   tomtom   fiat   audi a3   942044   ford mondeo   Samsung Galaxy Nexus   xc60   iphone 4   iPad   icom  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Browse Accessories by

Brand

Category

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

Weekly Top Ten Views - All Products

Brodit Brodit Accessories Mounting Accessories

Stock : 2

Item No : 215122

£ 15.18 incl. Vat



1.

Click Image to Enlarge


Oval centered face plate with predrilled AMPS holes. Adjustable 15.


A small, oval face plate with predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15 in every direction. 42x50x20mm.


Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.



Brodit Accessories Mounting Accessories

Brodit Brodit Accessories MoveClip

Stock : 3

Item No : 215503

£ 12.73 incl. Vat



2.

Click Image to Enlarge


MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws.


MultiMoveClip is for you who easily want to switch between different device holders on the same ProClip. Perfect if you have different cell phones but drive the same car, or if you want to place your GPS where the cell phone usually sits. You attach the MultiMoveClip onto your ProClip in your car and it is then ready to use with your device holders of choice. Your device holders are fitted just as secure as if they were screwed directly onto the ProClip.

MultiMoveClip fits with all Brodit's holders with tilt swivel. There are two sizes of tilt swivels and to be able to fit even the smaller size two adapter plates are enclosed with the delivery. Combined with item no 215504 MultiMoveClip also fits holders without tilt swivel.

MultiMoveClip film!


Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.



Brodit Accessories MoveClip

Brodit Garmin Nuvi 56 Mounting Accessories

Stock : 7

Item No : 215547

£ 17.63 incl. Vat



3.

Click Image to Enlarge


Tilt swivel mount.


Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.

With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.


Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.



Garmin Nuvi 56 Mounting Accessories

Brodit Garmin Nuvi 56LM Mounting Accessories

Stock : 7

Item No : 215547

£ 17.63 incl. Vat



4.

Click Image to Enlarge


Tilt swivel mount.


Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.

With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.


Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.



Garmin Nuvi 56LM Mounting Accessories

Brodit TomTom Go 620 Active Dock Holder with Tilt Swivel

Stock : 1

Item No : 215941

£ 48.99 incl. Vat



5.

Click Image to Enlarge



Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach!

If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled micro USB charging cable, item no. 941001. (941001 can not be used for TMC).

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. (Cable not included.)


Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.



TomTom Go 620 Active Dock Holder with Tilt Swivel

Brodit TomTom Go 6200 Active Dock Holder with Tilt Swivel

Stock : 1

Item No : 215941

£ 48.99 incl. Vat



6.

Click Image to Enlarge



Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach!

If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled micro USB charging cable, item no. 941001. (941001 can not be used for TMC).

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. (Cable not included.)


Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.



TomTom Go 6200 Active Dock Holder with Tilt Swivel

Brodit Samsung Galaxy Tab 4 7.0 SM-T235 Passive holder with tilt swivel

Stock : 1 - 3 [ call to confirm ]

Item No : 511636

£ 37.23 incl. Vat



7.

Click Image to Enlarge



With your Samsung in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the Samsung when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Samsung into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 4 7.0 SM-T235 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.




Samsung Galaxy Tab 4 7.0 SM-T235 Passive holder with tilt swivel

Brodit Apple iPhone 6 Passive holder with tilt swivel

Stock : 7

Item No : 511660

£ 25.47 incl. Vat



8.

Click Image to Enlarge


Padded.


Keep your iPhone 6 in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone 6 is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 6 without skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Apple iPhone 6 Passive holder with tilt swivel

Brodit Apple iPhone 6S Plus Passive holder with tilt swivel

Stock : 1 - 3 [ call to confirm ]

Item No : 511698

£ 29.39 incl. Vat



9.

Click Image to Enlarge


Adjustable holder. Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm.


Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.

In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.

Fits devices with "standard" sized skins (not rugged or slim size). Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.




Apple iPhone 6S Plus Passive holder with tilt swivel

Brodit Samsung Galaxy Note 5 Passive holder with tilt swivel

Stock : 1 - 3 [ call to confirm ]

Item No : 511771

£ 25.47 incl. Vat



10.

Click Image to Enlarge



When keeping your Note 5 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform in your car.




Samsung Galaxy Note 5 Passive holder with tilt swivel


All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories