Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   ford   motorola   audi   ipod   Samsung Galaxy Nexus   sun visor   tomtom   fiat   Samsung Galaxy S8   Samsung galaxy s8   audi a3   942044   ford mondeo   xc60   iphone 4   iPad   blackberry   Brodit iPhone   icom   a h   hp 6915  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 5 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit PDA  Passive holder with tilt swivel for HTC  Desire 500

Stock : 2

Item No. : 511563

£ 24.71

inc. Vat



When keeping your HTC Desire 500 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.




Item No :511563


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit PDA  Active holder with cig-plug. for HTC  Desire 500

Stock : 2

Item No. : 512563

£ 43.72

inc. Vat


With tilt swivel.


The active holder charges your smartphone when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.




Item No :512563


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit PDA  Active holder for fixed installation. for HTC  Desire 500

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 513563

£ 61.77

inc. Vat


With tilt swivel, with Molex adapter system.


An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS




Item No :513563


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit PDA  Charging Cable for HTC  Desire 500

Stock : 1

Item No. : 941010

£ 17.10

inc. Vat


Charging cable with cig-plug. With Micro-USB connector, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.


Charging cable with cig-plug. With Micro-USB connector, 2A charging. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. Can be used with Brodit passive holders. 12/24V. Length (+cig-plug 77 mm): 46 cm, stretched: 130 cm (or a bit more if necessary).
 
The Micro-USB connector house is angled. This means that the cable goes either on the back or on the front side, depending on the device. In order to make sure you get the cable on the side you want, please look at the picture and compare with your device. If you prefer the connector pin to be the other way around, please see item no 941011.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +60°C
Approvals: E, CE, FCC, ROHS
 




Item No :941010


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit PDA  Charging Cable for HTC  Desire 500

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 944010

£ 16.49

inc. Vat


Micro USB. 12/24V. Angled.


For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.



This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.


Item No :944010


Attach the Brodit PDA Holder for HTC  Desire 500 onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

HTC Sensation Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511268

£ 24.71 incl. Vat
Brodit HTC Sensation Passive holder with tilt swivel   All Countries

Click Image to enlarge



When keeping your device in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Ford C-Max ProClip Center mount

Stock : 3

Item No. : 653353

£ 15.99 incl. Vat
Brodit Ford C-Max ProClip 04-10 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford C-Max's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford C-Max. Made in black ABS plastic. Comes with detailed instructions.

HTC Desire Z Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511200

£ 24.71 incl. Vat
Brodit HTC Desire Z Passive Holder Tilt Swivel   All Countries  ONLY for an upright, closed position.

Click Image to enlarge


ONLY for an upright, closed position.
Keep your HTC in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the HTC when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The HTC is held in an uprigt, closed position in the holder.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

HTC Sensation XL X315e Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511318

£ 24.71 incl. Vat
Brodit HTC Sensation XL X315e Passive holder with tilt swivel   All Countries

Click Image to enlarge



When keeping your Sensation XL in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Subaru Impreza ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652078

£ 15.99 incl. Vat
Brodit Subaru Impreza ProClip 94-97 UK Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Subaru Impreza's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Subaru Impreza. Made in black ABS plastic. Comes with detailed instructions.

HTC Desire HD Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511198

£ 24.71 incl. Vat
Brodit HTC Desire HD Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



Keep your HTC in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your HTC is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Asus Google Nexus 7 Passive holder with tilt swivel 

Stock : 1

Item No. : 511412

£ 36.11 incl. Vat
Brodit Asus Google Nexus 7 Passive holder with tilt swivel   All Countries

Click Image to enlarge



With your Nexus 7 in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Nexus 7 when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Asus Google Nexus 7 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

Nexus 7 Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512412

£ 54.17 incl. Vat
Brodit Nexus 7 Active holder with cig-plug.   All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
Use an active holder for your Nexus 7 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Nexus 7 into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Nexus 7 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

Audi A4 Sedan ProClip Center mount

Stock : 4

Item No. : 654263

£ 15.99 incl. Vat
Brodit Audi A4 Sedan ProClip 08-15 All Countries Center mount

Click Image to enlarge



ProClip ar en monteringsbygel som monteras på bilens instrumentbrada. På ProClip kan du montera t ex en hållare till mobiltelefonen eller handdatorn. Trafiksakert och bekvamt -du har alltid din mobiltelefon, handdator etc. inom bekvamt rackhåll. ProClip ar speciellt utformad till varje bilmodell och går snabbt och latt att montera. Monteringen skadar inte bilens inredning och du behöver inga specialverktyg. Tillverkad i svart ABS-plast. Monteringsanvisning medföljer.

TomTom GO 500 New version Active Dock Holder with Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215682

£ 39.91 incl. Vat
Brodit TomTom GO 500 New version Active Dock Holder with Tilt Swivel  All Countries

Click Image to enlarge



Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach!
 
If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled micro USB charging cable, item no. 944010. (944010 can not be used for TMC).
 
The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. (Cable not included.)

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories