Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   ford   motorola   audi   ipod   Samsung Galaxy Nexus   sun visor   tomtom   fiat   Samsung Galaxy S8   Samsung galaxy s8   audi a3   942044   ford mondeo   xc60   iphone 4   iPad   blackberry   Brodit iPhone   icom   a h   hp 6915  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 15 Item(s) that match your Search
 

 Brodit ProClip for Toyota LandCruiser 100  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 630515

£ 15.51 incl. Vat

Item No. : 630515 for Years 02-07 in Australia

The images show the mounting position for the Brodit ProClip for your Toyota LandCruiser 100. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Adjustable console mount with tilt swivel.



A ProClip with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of Toyota LandCruiser 100. In most Toyota LandCruiser 100 it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota LandCruiser 100  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652643

£ 15.51 incl. Vat

Item No. : 652643 for Years 98-01 in Australia

The images show the mounting position for the Brodit ProClip for your Toyota LandCruiser 100. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

ONLY for models with double DIN (big front).



The ProClip is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota LandCruiser 100  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653161

£ 15.51 incl. Vat

Item No. : 653161 for Years 02-07 in Australia

The images show the mounting position for the Brodit ProClip for your Toyota LandCruiser 100. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota LandCruiser 100  - Angled mount

Stock : 4

Item No. : 653162

£ 15.51 incl. Vat

Item No. : 653162 for Years 02-07 in Australia

The images show the mounting position for the Brodit ProClip for your Toyota LandCruiser 100. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota LandCruiser 100  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 830515

£ 15.51 incl. Vat

Item No. : 830515 for Years 02-07 in Europe

The images show the mounting position for the Brodit ProClip for your Toyota LandCruiser 100. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Adjustable console mount with tilt swivel.



A ProClip with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of Toyota LandCruiser 100. In most Toyota LandCruiser 100 it is placed on the right side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota LandCruiser 100  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 832645

£ 15.51 incl. Vat

Item No. : 832645 for Years 98-01 in Europe

The images show the mounting position for the Brodit ProClip for your Toyota LandCruiser 100. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Brodit Accessories Adapter Cable 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 945054

£ 11.63 incl. Vat
Brodit Brodit Accessories Adapter Cable  All Countries  Molex Pin 4 adaptor to Mini USB.

Click Image to enlarge


Molex Pin 4 adaptor to Mini USB.

Motorola RAZR V3x Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 961660

£ 33.95 incl. Vat
Brodit Motorola RAZR V3x Active Holder  Tilt Swivel  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

HP iPAQ hx47xx Holder with speaker 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 994621

£ 95.05 incl. Vat
Brodit HP iPAQ hx47xx Holder with speaker  All Countries  Active holder for fixed installation. With 2 Amps/Molex charger and tilt swivel.

Click Image to enlarge


Active holder for fixed installation. With 2 Amps/Molex charger and tilt swivel.
Active holder for fixed installation, with speaker. The holder has a straight cable with open end for fixed installation and a cable with Molex adapter system. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for data transfer, power supply of a GPS receiver or other own solutions.

12/24 Volt. The power cable is to be connected over a 1,5 A fuse (power supply is required in order for the amplifier to function). 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Toyota Amazon ProClip Angled mount

Stock : 1

Item No. : 652644

£ 15.99 incl. Vat
Brodit Toyota Amazon ProClip 98-05 UK Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Toyota Amazon's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Amazon. Made in black ABS plastic. Comes with detailed instructions.

Nokia N95 Active Holder Tilt Swivel 

Stock : 1

Item No. : 965156

£ 43.72 incl. Vat
Brodit Nokia N95 Active Holder  Tilt Swivel  All Countries  With cig-plug.

Click Image to enlarge


With cig-plug.
The active holder charges your battery when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Volkswagen Eos ProClip Angled mount

Stock : 5

Item No. : 653359

£ 15.99 incl. Vat
Brodit Volkswagen Eos ProClip 07-11 UK Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Volkswagen Eos's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Eos. Made in black ABS plastic. Comes with detailed instructions.

TomTom GO 520 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215268

£ 43.72 incl. Vat
Brodit TomTom GO 520 Active Holder  Tilt Swivel  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Apple iPhone Holder For Cable Connection 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 915168

£ 38.01 incl. Vat
Brodit Apple iPhone Holder For Cable Connection  All Countries  For after-market cable. With tilt swivel. With plush coating.

Click Image to enlarge


For after-market cable. With tilt swivel. With plush coating.
Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the Apple iPhone automatically when you put your Apple iPhone in the holder so you do not have to connect it manually each time. (Cable not included). Please compare the connector on the picture so you know you will get the correct holder for your cable.

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Apple iPhone Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875168

£ 24.71 incl. Vat
Brodit Apple iPhone Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
When keeping your Apple iPhone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories