Brodit ProClip and Holders - Dedicated UK Supplier

 Mounting Adapter and Screws Included.
  When using the MultiStand it is easier to carry your tablet around with you. You easily place the device in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can connect e.g. a charging cable to the device when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Samsung  Galaxy Tab 4 10.1 SM-T530 Brodit Holder Fitting Instructions

 Micro USB. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy Tab 4 7.0 SM-T231 Brodit Holder Fitting Instructions

 Micro USB. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy Tab 4 7.0 SM-T230 Brodit Holder Fitting Instructions

 Micro USB. 12/24V. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy S5 Mini SM-G800H Brodit Holder Fitting Instructions

 Micro USB. 12/24V. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy S Duos 2 S7582 Brodit Holder Fitting Instructions

 Micro USB. 12/24V. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy Alpha Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable.
  The active holder charges your Galaxy Alpha when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy Alpha Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable.
  Use an active holder for your Tab S while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy Tab S 8.4 SM-T705 Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable.
  Use an active holder for your Tab S while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy Tab S 8.4 SM-T700 Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable.
  The active holder charges your S5 Mini when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy S5 Mini SM-G800H Brodit Holder Fitting Instructions