Brodit ProClip and Holders - Dedicated UK Supplier

 Passive holder with tilt swivel. With spring stud locking.
  This holder is to be used when you want to have your Galaxy Tab extra securely in place and still have it easy accessable.
 
The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 3 10.1 GT-P5210 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

Samsung  Galaxy Tab 3 10.1 GT-P5210 Brodit Holder Fitting Instructions

 Passive holder with tilt swivel. With spring stud locking.
  This holder is to be used when you want to have your Galaxy Tab extra securely in place and still have it easy accessable.
 
The holder is made of extra strong plastic and is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 3 10.1 GT-P5200 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

Samsung  Galaxy Tab 3 10.1 GT-P5200 Brodit Holder Fitting Instructions

 Passive holder with tilt swivel. 2 keys included.
  This holder is to be used when you want to secure your Galaxy Tab and still have it easy accessable.
 
The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Galaxy Tab without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Galaxy Tab from the holder you need the key, two keys are included. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 3 10.1 GT-P5220 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

Samsung  Galaxy Tab 3 10.1 GT-P5220 Brodit Holder Fitting Instructions

 Passive holder with tilt swivel. 2 keys included.
  This holder is to be used when you want to secure your Galaxy Tab and still have it easy accessable.
 
The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Galaxy Tab without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Galaxy Tab from the holder you need the key, two keys are included. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 3 10.1 GT-P5210 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

Samsung  Galaxy Tab 3 10.1 GT-P5210 Brodit Holder Fitting Instructions

 Passive holder with tilt swivel. 2 keys included.
  This holder is to be used when you want to secure your Galaxy Tab and still have it easy accessable.
 
The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Galaxy Tab without having it easy removable. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the Galaxy Tab from the holder you need the key, two keys are included. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.
 
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab 3 10.1 GT-P5200 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

Samsung  Galaxy Tab 3 10.1 GT-P5200 Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable.
  Use an active holder for your Note 10.1 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy Note 10.1 (2014 Edition) SM-P6050 Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable.
  Use an active holder for your Note 10.1 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy Note 10.1 (2014 Edition) SM-P6000 Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable.
  The active holder charges your Galaxy Mega when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy Mega 6.3 Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable.
  The active holder charges your Galaxy Note when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy Note GT-N7000 Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system.
  Use an active holder for your Note 10.1 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

 

Samsung  Galaxy Note 10.1 (2014 Edition) SM-P6050 Brodit Holder Fitting Instructions