Brodit ProClip and Holders - Dedicated UK Supplier

 With tilt swivel, with Molex adapter system.
  Use an active holder for your Galaxy Tab E 9.6 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient!
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

 

Samsung  Galaxy Tab E 9.6 Brodit Holder Fitting Instructions

 With tilt swivel.
  Use an active holder for your Galaxy Tab E 9.6 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12/24 Volt socket.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Galaxy Tab E 9.6 into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab E 9.6 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

Samsung  Galaxy Tab E 9.6 Brodit Holder Fitting Instructions

 
  With your Galaxy Tab E 9.6 in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the Samsung when it is in the holder.
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the tablet into place in the holder, and to take it with you when leaving the car.
 
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Tab E 9.6 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

Samsung  Galaxy Tab E 9.6 Brodit Holder Fitting Instructions

 MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.
  This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car's dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
MultiStand film!
 
 

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Samsung  Galaxy Tab E 9.6 Brodit Holder Fitting Instructions

 Micro USB. 12/24V. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy S7 Edge Brodit Holder Fitting Instructions

 Micro USB. 12/24V. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy S7 Brodit Holder Fitting Instructions

 With USB-cable with cig-plug adapter. With tilt swivel.
  The active holder charges your Galaxy S7 Edge when it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. 12 Volt. Attach the holder onto a ProClip Mounting Platform in your car.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy S7 Edge Brodit Holder Fitting Instructions

 With USB-cable with cig-plug adapter. With tilt swivel.
  The active holder charges your Galaxy S7 when it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. 12 Volt. Attach the holder onto a ProClip Mounting Platform in your car.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Due to Issues with this device we are not responsible for any defects

Samsung  Galaxy S7 Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable. Fits for devices with skin; adjustable top.
  The active holder charges your phone when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Fits for devices with skin. The top part of the holder is adjustable and adapts to the height of your phone. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy S7 Brodit Holder Fitting Instructions

 With Molex adapter system. 2A charger. With tilt swivel.

  An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform in your car.
 
With Molex adapter system. You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
The product is E-approved. 12/24 Volt. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

 

Samsung  Galaxy S7 Edge Brodit Holder Fitting Instructions