Brodit ProClip and Holders - Dedicated UK Supplier

 With tilt swivel. Fits for devices with skin.
  The active holder charges your phone when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Passar enhet med skin. Attach onto a ProClip Mounting Platform.

 

Samsung  Galaxy S III i9305 Brodit Holder Fitting Instructions

 
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy Note 10-1 Brodit Holder Fitting Instructions

 
  With your Samsung Galaxy Note in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Samsung Galaxy Note when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Samsung Note into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Samsung Galaxy Note 10-1 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 

Samsung  Galaxy Note 10-1 Brodit Holder Fitting Instructions

 With tilt swivel. With USB cable. Fits for devices with skin.
  The active holder charges your phone when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Fits for devices with skin. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Samsung  Galaxy S III i9305 Brodit Holder Fitting Instructions

 Adjustable Holder, Fits Devices with Skin.
  Keep your Galaxy S II in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your Galaxy S II is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for Galaxy S II with skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Also fits with Samsung 2000mAh thicker battery. Attach onto ProClip Mounting Platform.

 

Samsung  Galaxy S III i9305 Brodit Holder Fitting Instructions

 
  When keeping your Galaxy S III in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

 

Samsung  Galaxy S III i9305 Brodit Holder Fitting Instructions

 With tilt swivel.
  The active holder charges your Galaxy S III when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

 

Samsung  Galaxy S III i9305 Brodit Holder Fitting Instructions

 Micro USB. 12/24V. Angled.
  For use in the vehicle's cigarette lighter socket, charges your unit. Can be connected to the unit when it is in a passive holder.

  This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Samsung  Galaxy S III i9305 Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger.
  An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

 

Samsung  Galaxy S III i9305 Brodit Holder Fitting Instructions

 With tilt swivel, with Molex adapter system. 2A charger. Fits for devices with skin.
  An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Fits devices with skin. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

 

Samsung  Galaxy S III i9305 Brodit Holder Fitting Instructions